***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Aug 16, 2025 8:20 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 
  Print view Previous topic | Next topic 
Author Message
Lindamon
 Post subject: CNC MOP nameplates
PostPosted: Wed Aug 27, 2014 1:07 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Sun Aug 29, 2010 10:33 am
Posts: 92
First name: Damon
Last Name: Wack
State: FL
Country: USA
Focus: Build
Are there some CNC services that can cut some MOP nameplates suitable for inlaying in a fretboard?

thanks,

Damon

_________________
Damon Wack
https://www.facebook.com/LindamonGuitars
Top
 Profile  
 
Pwoolson
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Aug 27, 2014 1:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2558
Location: United States
Yes, lots of them. Pretty much anyone cutting CNC can cut shell.
I've used precisionpearlinlay.com in the past and had great results.
Top
 Profile  
 
Stuart Gort
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Aug 27, 2014 2:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Sure there are....but unless you've done this before you'll probably learn a thing or two about cutting inside corners.

Basically...since the machine cuts with a round bit...and very, very tiny round bits take MUCH longer to cut with, you're going to find that creating a design with sharp internal corners drives the price up.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic
Top
 Profile  
 
klooker
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Aug 27, 2014 2:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Andy Birko

http://www.birkonium.com/

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.
Top
 Profile  
 
Lindamon
 Post subject: Re: CNC MOP nameplates
PostPosted: Thu Aug 28, 2014 7:40 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Sun Aug 29, 2010 10:33 am
Posts: 92
First name: Damon
Last Name: Wack
State: FL
Country: USA
Focus: Build
Thanks guys!

_________________
Damon Wack
https://www.facebook.com/LindamonGuitars
Top
 Profile  
 
Terence Kennedy
 Post subject: Re: CNC MOP nameplates
PostPosted: Thu Aug 28, 2014 11:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3446
Location: Alexandria MN
Another satisfied Precision Pearl customer.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.
Top
 Profile  
 
Jaybird840
 Post subject: Re: CNC MOP nameplates
PostPosted: Fri Aug 29, 2014 3:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Plus one for birkonium.com
Top
 Profile  
 
Chris Paulick
 Post subject: Re: CNC MOP nameplates
PostPosted: Mon Sep 01, 2014 2:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
Where's the fun in that?
You should give it ago hand cutting 1st.
:)


These users thanked the author Chris Paulick for the post: Dkeddy27 (Wed Sep 03, 2014 8:57 pm)
Top
 Profile  
 
bluescreek
 Post subject: Re: CNC MOP nameplates
PostPosted: Mon Sep 01, 2014 2:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4916
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I do them by hand .
CP inlay does hand cutting at very reasonable prices and will be more accurate than you may think,

Also no set up fee.
518-483-7685

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


These users thanked the author bluescreek for the post: TimAllen (Sat Sep 06, 2014 10:00 am)
Top
 Profile  
 
Chris Paulick
 Post subject: Re: CNC MOP nameplates
PostPosted: Mon Sep 01, 2014 2:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
bluescreek wrote:
I do them by hand .
CP inlay does hand cutting at very reasonable prices and will be more accurate than you may think,

Also no set up fee.
518-483-7685



There ya go!
[:Y:]
How many guitars you all planning on building anyway?


These users thanked the author Chris Paulick for the post: ChuckH (Tue Sep 02, 2014 10:20 pm)
Top
 Profile  
 
LaurieW
 Post subject: Re: CNC MOP nameplates
PostPosted: Tue Sep 02, 2014 9:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Apr 25, 2007 8:39 am
Posts: 515
Focus: Build
Status: Amateur
I had logos made by Andy Depaule. He as them hand cut overseas, no CNC, but worth checking out.

http://www.luthiersupply.com

_________________
____________________________________
Time you enjoy wasting is not wasted time.
Top
 Profile  
 
theguitarwhisperer
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 11:22 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
I have Andy Birko make these beautiful "S" medallions on his amazingly incredible CNC program, from a drawing I submitted to him.
Sorry for the sideways orientation.
I can't see how they could look any nicer, especially if they were done by hand.


You do not have the required permissions to view the files attached to this post.

_________________
Old growth, shmold growth!
Top
 Profile  
 
SteveSmith
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 11:33 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7475
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
LaurieW wrote:
I had logos made by Andy Depaule. He as them hand cut overseas, no CNC, but worth checking out.

http://www.luthiersupply.com


Andy did the one in my avatar as well.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Chris Paulick
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 3:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
I guess you all are missing my point.
I always try and encourage people to try and do it themselves.


These users thanked the author Chris Paulick for the post: Dkeddy27 (Wed Sep 03, 2014 8:58 pm)
Top
 Profile  
 
SteveSmith
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 4:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7475
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Chris Paulick wrote:
I guess you all are missing my point.
I always try and encourage people to try and do it themselves.


Hey Chris, you make a good point. Some inlays I buy and some I cut. Some I buy and modify. It's a worthwhile skill to develop and not really all that difficult.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
theguitarwhisperer
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 4:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Chris Paulick wrote:
I guess you all are missing my point.
I always try and encourage people to try and do it themselves.


Actually we were trying to help answer the guy's question, which was are there any CNC services that cut MOP nameplates for inlaying into fretboards.

Answering his question doesn't mean we are missing your point.

:D Try to picture me saying this with a smile and pleasant tone to my voice. :)

_________________
Old growth, shmold growth!
Top
 Profile  
 
Chris Paulick
 Post subject: Re: CNC MOP nameplates
PostPosted: Wed Sep 03, 2014 4:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
Got ya!


Top
 Profile  
 
brazil66
 Post subject: Re: CNC MOP nameplates
PostPosted: Thu Sep 04, 2014 6:00 am 
Offline
Cocobolo
Cocobolo

Joined: Sun May 30, 2010 10:45 am
Posts: 233
First name: Michael
Last Name: Tulloch
State: Vermont
Country: USA
Focus: Build
Status: Semi-pro
Custom Pearl Inlay , yes.....that young Kiefer, he's the best pearl cutter out there....better than CNC.
Top
 Profile  
 
ernie
 Post subject: Re: CNC MOP nameplates
PostPosted: Thu Sep 04, 2014 12:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
plus 1 for andy depaule
Top
 Profile  
 
dzsmith
 Post subject: Re: CNC MOP nameplates
PostPosted: Thu Sep 04, 2014 8:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
First name: D
Last Name: S
State: TX
Country: USA
Focus: Build
Status: Amateur
theguitarwhisperer wrote:
I have Andy Birko make these beautiful "S" medallions on his amazingly incredible CNC program, from a drawing I submitted to him.
Sorry for the sideways orientation.
I can't see how they could look any nicer, especially if they were done by hand.

Wow!

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com